Supplier-Specific Size Chart
Paper Cup Dimensions at a Glance
The first four columns describe the formed cup. The final three describe the flat double-wall artwork panel. Keeping these groups separate prevents the flat print width from being mistaken for the cup’s rim measurement.
| Nominal size | Rim width | Base width | Cup height | Body height | Panel top width | Panel bottom width | Panel depth |
|---|---|---|---|---|---|---|---|
| 8 oz DW | 90 mm | 60 mm | 84 mm | 72 mm | 261 mm | 202 mm | 84 mm |
| 10 oz DW | 90 mm | 61 mm | 95 mm | 86 mm | 263 mm | 201 mm | 86 mm |
| 12 oz DW | 90 mm | 61 mm | 110 mm | 98 mm | 264 mm | 202 mm | 103 mm |
| 16 oz DW | 90 mm | 61 mm | 135 mm | 123 mm | 266 mm | 206 mm | 127 mm |
Verification note: these measurements were transcribed from the supplied 8oz-DW, 10oz-DW, 12oz-DW, and 16oz-DW artwork templates. Each source identifies its measurements as approximate. All four show a 12 mm step height. They are not universal specifications for every cup with the same ounce label.
Paper Cup Parameters and Matching Dielines
Review each product’s formed-cup dimensions, open the parameter image at full resolution, and download the matching double-wall artwork template at 100% scale.
Product-reference note: the 10 oz parameter image shows a 100 mm formed-cup height, while the downloadable double-wall PDF lists an approximate 95 mm height. The 16 oz image and PDF also differ slightly. These values may represent separate product versions or rounding, so confirm the final SKU, sample, and production dieline with the supplier before ordering.
Specification Basics
What Each Measurement Means
An ounce label describes nominal capacity, not complete geometry. Record the dimensions that affect lids, carriers, equipment, storage, and artwork before approving a bulk order.
Rim Width
The rolled upper edge engages with the lid. Confirm the cup code, rim measurement, lid profile, and approved matching lid.
Base Width
The base affects stability and fit in carriers, holders, dispensers, and vending-machine mechanisms.
Cup and Body Height
Height affects equipment clearance, shelf presentation, case packing, printable area, and the visible outer wall.
Flat Panel Size
The curved sidewall panel is not a rectangle. Keep artwork on the supplier’s final fan-shaped production dieline.
Size Roles for Beverage Programs
These are selection examples rather than fixed serving rules. Recipe volume, foam, headspace, local labeling practice, and customer expectations should guide the final choice.
| Size | Typical business role | Buying consideration |
|---|---|---|
| 8 oz | Cappuccino, flat white, tea, and smaller portions | Check whether the 90 mm profile suits the intended visual portion and existing lid stock. |
| 10 oz | Regular coffee, Americano, and office coffee | Verify dispenser, sleeve, and cup-holder fit. |
| 12 oz | Latte, drip coffee, and standard takeaway service | Confirm headspace for milk foam and the selected lid. |
| 16 oz | Large coffee, tea, and higher-volume takeaway drinks | Check clearance for dispensers, shelves, carriers, and equipment. |
Review PaperBull’s hot paper cups when building a size range for a hot-beverage program.
Artwork Handoff
How to Read the Dieline
The supplied files distinguish the cutting form, bleed, visible limit, guides, and seam movement. Always follow the legend in the actual production file because conventions can vary between suppliers.
Read the Production Zones
- Cutting form: the reviewed files use an outer blue line for the final cutting shape.
- Bleed: extend full-bleed artwork at least 3 mm beyond the relevant boundary shown in these templates.
- Visible limit: keep logos, required text, faces, and codes comfortably inside the designated visible area.
- Seam: the side edges overlap during forming, so continuous bands may not join perfectly.
- Movement: the supplied files warn that artwork may move approximately 1 mm up or down during forming.
Artwork Setup Checklist
Keep each size on its own approved template and review the file at final production scale before proof approval.
- Work on the supplier’s final template at 100% scale.
- Extend full-bleed graphics by the amount shown in the file; these templates specify 3 mm.
- Keep essential text and logos within the designated visible or safe area.
- Supply non-vector images in CMYK at 300 dpi at final placed size.
- Preserve requested spot-color references and confirm the conversion or matching workflow.
- Convert fonts to outlines when font files are not being supplied.
- Avoid text at 6 pt or below unless a physical proof confirms legibility.
- Avoid lines below 0.5 pt when they are critical to the design.
- Discuss black builds and difficult bright colors with the printer before approval.
- Review spelling, legal text, barcodes, and print details before approving the proof.
Digital proofs are useful for layout but should not be treated as perfectly color-accurate across screens, substrates, coatings, and printing conditions. Review PaperBull’s custom printing process for additional preparation context.
Wholesale Specification
What Bulk Buyers Should Confirm
A useful request for quotation describes the complete packaging system rather than asking only for “12 oz paper cups.”
Product and Service Fit
- Nominal size and required usable fill level
- Hot or cold beverage and expected serving temperature
- Single-wall, double-wall, or another required construction
- Top rim, base width, and height where equipment fit matters
- Approved lid, sleeve, carrier, dispenser, or vending constraints
Commercial and Artwork Scope
- Quantity per size and expected reorder pattern
- Plain or custom-printed requirement
- Number of artwork versions and colors
- Destination market and delivery location
- Any material or compliance requirement that must be verified
For multi-site programs, connect every cup SKU to its approved lid, sleeve, case configuration, artwork version, and sample. PaperBull’s packaging solutions can help organize components by service scenario.
Buyer Questions
Paper Cup Dimensions FAQ
Short answers to the questions that most often affect size selection, lid fit, artwork preparation, and bulk approval.
Are paper cup dimensions standardized?
No single set of dimensions applies to every supplier and construction. Two cups with the same ounce label may differ in rim width, base width, height, wall structure, and usable fill.
What are the 12 oz dimensions in this range?
The supplied 12 oz DW template shows an approximate 90 mm rim width, 61 mm base width, 110 mm cup height, and 98 mm body height. Its flat panel is approximately 264 mm across the top, 202 mm across the bottom, and 103 mm deep.
What are the 16 oz dimensions in this range?
The supplied 16 oz DW template shows an approximate 90 mm rim width, 61 mm base width, 135 mm cup height, and 123 mm body height. Its flat panel is approximately 266 mm across the top, 206 mm across the bottom, and 127 mm deep.
Can the same lid fit all four sizes?
It may be possible within this reviewed family because all four templates show an approximately 90 mm rim. Buyers still need the supplier’s matching lid code and a tested sample.
How much bleed should a cup dieline include?
Use the amount specified on the final supplier template. These four reviewed files call for at least 3 mm of artwork bleed; do not apply that value blindly to another supplier’s file.
Can one dieline be resized for another cup?
No. Scaling changes the arc, seam, visible area, and relationship between artwork and the formed cup. Prepare and approve a separate production file for each cup size.
Source Transparency
Sources and Verification Notes
The dimensional and artwork claims on this local page are supplier-specific and traceable to the four source files below. The beverage-use examples are qualified selection guidance, not universal specifications.
- 8oz-DW.pdf — 8 oz double-wall formed-cup dimensions, flat-panel dimensions, bleed, and artwork guidance.
- 10oz-DW.pdf — 10 oz double-wall formed-cup dimensions, flat-panel dimensions, bleed, and artwork guidance.
- 12oz-DW.pdf — 12 oz double-wall formed-cup dimensions, flat-panel dimensions, bleed, and artwork guidance.
- 16oz-DW.pdf — 16 oz double-wall formed-cup dimensions, flat-panel dimensions, bleed, and artwork guidance.
About the Author
Vincent Zheng
Co-Founder and Sales Manager at PaperBull
Vincent has five years of packaging-industry experience and works with bulk purchasers on packaging selection, cup-and-lid compatibility, custom printing, and practical foodservice supply requirements.
Need a Confirmed Cup Size and Dieline?
Share your beverage, required sizes, quantity, artwork status, destination, and equipment constraints. PaperBull can help confirm the cup-and-lid system and matching production template.